Avaya (109352-E, Manual de usuario Pagina 67

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 144
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 66
Installing the BCN and BCN RLC
109352-E Rev. A 3-5
Additional Equipment
You need to supply the additional equipment listed in Table 3-2.
Site Requirements
To obtain satisfactory BCN performance, your site must meet all of the following
electrical, space, and environmental requirements.
Table 3-2. Tools and Equipment You Supply
Item Quantity
ANSI console or PC (to establish a Bay Networks Technician Interface
session)
1
Optional: 25-pin male to 9-pin female cable adaptor (needed only if you
want to cable a PC directly to the BCN to establish a local connection)
1
SPARCstation, PC, IBM RS/6000, or HP 9000 (for Site Manager) 1
A shielded console cable (only if you did not order one separately from Bay
Networks)
1
An electronic enclosure rack in which to mount the BCN. The rack must
meet the following requirements:
– Heavy-duty steel construction
– Electronic Industries Association (EIA) standard hole spacing
Width: 19 in. (48.3 cm)
– Depth: 24 in. (61 cm)
Any electronic enclosure rack panels or doors must contain louvers or
screens to prevent overheating
1
Tape measure 1
5/32-in. hex wrench 1
Phillips screwdriver 1
Standard screwdriver 1
Caution: Failure to adhere to these requirements may result in poor
equipment performance.
Vista de pagina 66
1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 143 144

Comentarios a estos manuales

Sin comentarios