Avaya (109352-E, Manual de usuario Pagina 101

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 144
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 100
Hot-Swapping Hardware Components
109352-E Rev. A 5-5
Protecting Memory Card Files
Bay Networks ships each memory card with its Read-Write Protect switch in the
unprotected position (F
igure 5-2). After successfully loading the configuration file
and saving your configuration, you may want to write-protect the memory card for
backup purposes.
To change memory card protection, complete the following steps:
1. Remove the memory card from the hardware platform.
a. Press the rectangular ejector button adjacent to the memory card
receptacle. (Refer to Figure 5-2.)
b. Pull the card toward you.
2. Locate the Read-Write Protect Switch on the edge opposite the arrow on
the memory card (Figure 5-3).
3. Adjust the Read-Write Protect Switch.
Note: You typically do not operate a hardware platform with a write-protected
memory card. We recommend making a copy of your configuration on another
memory card, write-protecting the card, and storing it in a safe place.
Caution: You must remove the card from the hardware platform before
changing the read-write protection. Failure to remove the card may result in
improper write-protection.
Vista de pagina 100
1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 143 144

Comentarios a estos manuales

Sin comentarios