Avaya (109352-E, Manual de usuario Pagina 48

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 144
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 47
Installing and Maintaining BN Platforms
2-4 109352-E Rev. A
Cables
Make sure that you received the correct cables with your shipment. If you plan to
build your own cables, or if you want to order additional cables, refer to Cable
Guide for Routers and BNX Platforms (router software) or Cable Guide
(BayStream software).
Additional Equipment
You need to supply the additional equipment listed in Table 2-2.
Table 2-2. Tools and Equipment You Supply
Item Quantity
ANSI console or PC (for establishing a Bay Networks Technician Interface
session)
1
Optional: 25-pin male to 9-pin female cable adaptor (needed only if you
want to cable a PC directly to BLN-2 to establish a local connection)
1
SPARCstation, PC, IBM RS/6000, or HP 9000 (for the Site Manager
interface application, if not already installed)
1
A shielded console cable (only if you did not order one separately from Bay
Networks)
1
An electronic enclosure rack to mount the BLN-2; rack must meet these
requirements:
– Heavy-duty steel construction
– Electronic Industries Association (EIA) standards
– Standard hole spacing
Width: 19 in. (48.3 cm)
– Depth: 24 in. (61.0 cm)
Any electronic enclosure rack panels or doors must contain louvers or
screens to prevent overheating.
1
Tape measure 1
Phillips screwdriver 1
Vista de pagina 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 143 144

Comentarios a estos manuales

Sin comentarios