Avaya Using Technician Interface Scripts Manual de usuario Pagina 89

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 849
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 88
show at
117380-A Rev. A 2-45
alerts
Displays all AppleTalk circuits that are enabled but not up. Mode is always Enabled but
the state will be down. Use this display to identify the interfaces that are not working. The
table includes the following information:
Sample Display - show at alerts
AppleTalk Circuit Alerts: Enabled but state is down
-----------------------------------------------------
Circuit Mode Network Address Zone List
-------- ----------- ----------- --------- ----------------------------------
S31 Enabled 60060-60060 Dynamic 'WAN'
1 entries found.
1 total entries.
Circuit Name of the circuit the port is on.
Mode Mode will be Enabled, in this case.
Network Network start and end numbers that constitute the range of the
network numbers. These numbers are in the range of 1 through
65,279.
Address Network address of the port, which is Dynamic, meaning that the
seed router assigns it, or a manually configured network address
and identifier.
Zone List List containing all the zones configured for the network range.
Vista de pagina 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 848 849

Comentarios a estos manuales

Sin comentarios