Avaya Using Technician Interface Scripts Manual de usuario Pagina 238

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 849
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 237
Using Technician Interface Scripts
2-194 117380-A Rev. A
Sample Display - show decnet base
DECnet Base Record Information
------------------------------
Protocol State
-------- ---------
DECNET Up
circuits [
<circuit name>
]
Displays the attributes of all DECnet circuits or a specified DECnet circuit configured on
the router. The table includes the following information:
Circuit Name of the circuit.
State State of the circuit as follows:
Up - Interface is operating.
Disable - User has manually disabled the interface.
Down - Interface is malfunctioning.
INIT - Interface is initializing.
Not Present - Interface is not operating because another
subsystem is malfunctioning. You should check the state of the
physical circuit.
Area DECnet Phase IV Area ID for this circuit; the first six bits of a
DECnet Phase IV node address.
Node ID DECnet Phase IV Node ID for this circuit; the last ten bits of a
DECnet Phase IV node address.
Type Media type of this circuit; for example, Ethernet.
Vista de pagina 237
1 2 ... 233 234 235 236 237 238 239 240 241 242 243 ... 848 849

Comentarios a estos manuales

Sin comentarios