Avaya Using Technician Interface Scripts Manual de usuario Pagina 763

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 849
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 762
Using Technician Interface Scripts
2-716 117380-A Rev. A
alerts
Displays the XNS interfaces that are enabled but not currently up. Use this command to
identify interfaces that are not forwarding traffic. The table includes the following
information:
Sample Display - show xns alerts
XNS Circuit Table Alerts
------------------------
Circuit State XNS Address Encaps Method
-------- -------- -------------------- ----------------
0 Entrie(s) found.
adjacent hosts
Displays the configurable parameters for each statically configured adjacent host (router)
from which hellos have been received. The table includes the following information:
Circuit Name of the circuit.
State State of the interface, which will be Down.
XNS Address Network address of the XNS interface.
Encaps Method Level 0 protocol, frame format, or encapsulation that the circuit
uses; is Ethernet, Token Ring, FDDI, frame relay, or SMDS.
Host Network Address Network address of the adjacent router.
Host ID Address Host identifier for the adjacent router.
XNS Interface XNS address of the network device.
WAN Address Corresponding WAN address of the adjacent XNS-level host ID.
Vista de pagina 762
1 2 ... 758 759 760 761 762 763 764 765 766 767 768 ... 848 849

Comentarios a estos manuales

Sin comentarios