Avaya DECT Messenger Fundamentals - Communication Server 1000 Manual de usuario descargar pdf (Pagina 97)

Figure 23: eCAP Sending Message option

Not all input devices are capable of generating all five input parameters. If parameters are

missing (for example, if a switch is connected to the eIO module), the parameters are taken

from fields in tables.

The following five parameters are needed.

• *SET/*RESET

This is described in

SET/RESET structure on page 103.

• Group

The Group is used to define the destination. The Group contains group members, each

of which is a device.

Note:

This requires that the Group must be defined in DECT Messenger, otherwise an alarm

for a certain group comes in but there is no group specification, which means that the

alarm cannot be delivered.

• Alarm Description

The Alarm Description refers to the eKERNEL_Alarm table, which contains all the

properties that are associated with that specific alarm, such as Priority, ringing time of an

extension, the repeat interval time, and so on.

• Message

This is the actual message that is transferred to the device.

• Remove After: *SENT, *RESET, *CALCULATE

This is described in

SET/RESET structure on page 103.

Alarm handling is shown in

Figure 24: Alarm handling on page 98, which illustrates an input

program that provides the input parameters.

eDMSAPI Inbound

DECT Messenger Fundamentals March 2012 97

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 167 168

Sin comentarios

Avaya DECT Messenger Fundamentals - Communication Server 1000 Manual de usuario Pagina 97