Avaya DECT Messenger Fundamentals - Communication Server 1000 Manual de usuario Pagina 85

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 84
If you have already edited the tables using the instructions in step 4, skip to step 7.
If not, start eKERNEL:
• Click Start on the Windows task bar, and choose Programs >... eKERNEL.
• Start the module eCONFIG.
• Log in as user: admin, with password: admin.
6. Enter configuration values.
• In the eCONFIG window, double-click the Site Site1 line. The following window
opens:
• Enter the Administrator name and Administrator e-mail.
• Enter the IP address of the PC where the eKERNEL resides in the field:
eKERNEL IP Address.
• Click OK.
7. Verify the Configuration database path.
Still in the eCONFIG window, you must specify the database locations (the default
database path are usually correct).
• Set the path to the Messenger Configuration database to the following
directory: c:\SOPHO Messenger@net\Mdb\ (unless you have installed to a
directory other than the default). The file name is Messenger_CFG.mdb.
Verify the path setting for the Configuration database; normally you do not need
to change this.
Note:
The Configuration database type is always MS Access and always points directly
to a file (not using ODBC). The default setting is shown in the following illustration:
Installing and getting started
DECT Messenger Fundamentals March 2012 85
Vista de pagina 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 167 168

Comentarios a estos manuales

Sin comentarios