
This is the COM port on your computer to which you have connected your V.24
interface from the FieldPoint FP-1000 module.
• Baud Rate
Communication speed over the V.24 line. Default this is 115200 b/s. The DIP switch
settings associated with the speed are displayed. Ensure that the DIP switches for
the Baud rate on the FP-1000 module are in the same position as displayed in your
screen. The DIP switches on the FP-1000 module are under a small cover on the
top of the FP-1000 module.
• Time-out (msec.)
Time out counter on the V.24 communication. Accept the default (200 msec).
Note:
Do not close this window yet; proceed to the next step.
5. Search for connected modules
• Click Find Devices
This scans the FieldPoint Module address through the V.24 interface, and
automatically detects that modules are connected. Click this button if you are sure
that all the other settings in this window are correct.
The following window is displayed.
Connecting National Instruments modules
DECT Messenger Fundamentals March 2012 117
Comentarios a estos manuales