Avaya DECT Messenger Fundamentals - Communication Server 1000 Manual de usuario Pagina 32

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 31
After you enter the parameters, note the following:
• A red bullet before an item indicates that the parameter is mandatory.
• Some items contain default parameter values.
Avaya recommends that you use the Browse option, when present, to define
a location, rather than typing an entry.
Note:
The group name that you enter must match the group name entered for the input
module. If the input module is an eAPI, eCAP, or eESPA, the group name matches
that in the external system. Therefore, you must know the external system that
delivers the group name.
Note:
The input module provides not only a group name, but also an alarm. Ensure that
the alarm from the input module corresponds to an alarm in the alarms list. Ask
a system specialist if you are uncertain about this.
The parameters are described in more detail in
Group parameters on page 34.
4. Confirm your choices.
Click OK and follow the instructions on the screen, if applicable.
Changing group parameters
Complete the following steps to change group parameters.
Changing group parameters
1. Open eCONFIG.
2. Select the input module for which you want to change the group parameters.
Avaya DECT Messenger Administrator Guide
32 DECT Messenger Fundamentals March 2012
Vista de pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 167 168

Comentarios a estos manuales

Sin comentarios