Avaya DECT Messenger Fundamentals - Communication Server 1000 Manual de usuario descargar pdf (Pagina 88)

11. Enter configuration information.

Enter the correct values for the IP addresses:

• Area Description - Description field for the DECT system you are connecting

to. Seats Count - Total number of seats you require. (See the Note at the end

of this list)

• Seats count for eKERNEL - Default value = 10

• Seats count for external - Number of seats for eWEB - Default = 3

• External IP address - The IP address of the PC on which the eDMSAPI runs

External Port - Default = 2010

• API Address - IP address of the PC where the CSTA_Service is running API

Port - Default = 59000

• PBX Address: IP address of the DMC on the DECT System you are connecting

to.

• PBX Port - Always 1025 for DMC PBX Type – CS 1000

• PBX License - Always Messenger

• PBX Type - Always Avaya

Note:

Only specify the number of seats you anticipate requiring, (not the total number

of seats allowed by your license), as takes longer for seats to register. Ensure

that you do not exceed the number of seats (CTI Messaging Channels) as

specified in your license Manager. If the number of seats is not sufficient in the

License, you cannot make an LRMS (E2) message call.

12. Add a DECT Device.

DECT Messenger Customer Engineer Manual

88 DECT Messenger Fundamentals March 2012

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 167 168

Sin comentarios

Avaya DECT Messenger Fundamentals - Communication Server 1000 Manual de usuario Pagina 88