Avaya Configuring IP Utilities Manual de usuario Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 198
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
Starting TCP, FTP, TFTP, Telnet, NTP, and NetBIOS over IP
117358-A Rev. A 1-17
To start a Telnet server, perform the following actions:
To start a Telnet client, perform the following actions:
Disabling and Reenabling Telnet Services
After you configure IP and start Telnet on the router, all Telnet default parameters
are automatically enabled on the router.
Using the BCC
To disable a Telnet server on the router, navigate to the server-specific prompt and
enter:
disable
Site Manager Procedure
You do this System responds
1. From the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose Global Protocols. The Global Protocols menu opens.
3. Choose Telnet Server. The Telnet Server menu opens.
4. Choose Create Server. The Telnet Configuration window opens,
allowing you to customize Telnet Server
global parameters.
Site Manager Procedure
You do this System responds
1. From the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose Global Protocols. The Global Protocols menu opens.
3. Choose Telnet Client. The Telnet Client menu opens.
4. Choose Create Client. The Edit Telnet Global Client Parameters
window opens, allowing you to customize
Telnet Client global parameters.
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 197 198

Comentarios a estos manuales

Sin comentarios