
Parameter Descriptions
117358-A Rev. A A-27
NetBIOS/IP Static Entry Table Parameters
Use the following guidelines to configure the NetBIOS/IP static entry table
parameters in the Configuration Manager window.
Parameter: Rebroadcast Address
Path: Configuration Manager > Protocols > IP > NetBIOS > Interface
Default: Null
Options: An IP broadcast address
Function: Specifies a broadcast address to use when rebroadcasting NetBIOS packets out
this interface.
Instructions: By default, NetBIOS uses the IP broadcast address configured for this
interface. Set this parameter if you want to override this broadcast address.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.11.2.1.11
Parameter: Enable
Path: Configuration Manager > Protocols > IP > NetBIOS > Static Name
Default: Enable
Options: Enable
| Disable
Function: Enables or disables caching of the NetBIOS name you have selected.
Instructions: Set the parameter to Enable to activate caching of the name you selected. Set
the parameter to Disable to deactivate caching of the name you selected.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.11.4.1.2
Parameter: NetBIOS Scope ID
Path: Configuration Manager > Protocols > IP > NetBIOS > Static Name
Default: None
Options: A NetBIOS scope identifier
Function: Identifies the area of the network across which the NetBIOS name is known.
Instructions: Enter a name string that meets the requirements of the Domain Name System
as described in RFC 833.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.11.4.1.5
Comentarios a estos manuales