Avaya Configuring IP Utilities Manual de usuario Pagina 169

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 198
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 168
Parameter Descriptions
117358-A Rev. A A-21
Parameter: Source IP Address
Path: Select Protocols > Global Protocols > NTP Peers
Default: None
Options: Any valid IP address
Function: Allows you to specify a single Internet protocol address that NTP uses to
override the source address of the interface from which the NTP packet is
transmitted. You use this parameter only when you want the remote time server
to filter NTP packets based on IP source address. We recommend using a
circuitless IP address as the source IP address.
If you do not specify a source IP address, NTP uses the IP address of the
outbound router IP interface address.
Instructions: Specify the source IP address of a remote time server in the Source IP Address
selection box.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.17.3.1.7
Parameter: Peer Preference
Path: Select Protocols > Global Protocols > NTP > Peers
Default: No
Options: Yes
| No
Function: Allows you to specify whether the local NTP client will prefer (accept) or
rejects NTP packets from the remote time server.
Instructions: When you select Yes, the local NTP client prefers (accepts) NTP packets from
the remote time server and synchronizes its internal clock to it. When you select
No, the local NTP client rejects packets from the remote time server.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.17.3.1.8
Vista de pagina 168
1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 197 198

Comentarios a estos manuales

Sin comentarios