
Customizing NTP Services
117358-A Rev. A 7-7
Setting Local Host Mode
The BCC does not support this function.
Local Host Mode indicates the mode of operation of the local NTP client. By
default, the Local Host Mode is set to Client, because only Unicast Client mode is
supported.
To specify the local mode in which you want to configure the local NTP client,
complete the tasks in the following table.
5. Click on the IP address of the time server
that displays in the NTP Peer list.
6. Set the Config Peer Mode parameter.
Click on Help or see the parameter
descriptions on page A-20.
7. Click on Apply. Site Manager sets the mode for the
remote time server to Server. Bay
Networks supports only the Server
option.
8. Click on Done. The NTP Peers Configuration List
window closes, and the Configuration
Manager window opens.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose Global Protocols. The Global Protocols menu opens.
3. Choose NTP. The NTP menu opens.
4. Choose Peers. The NTP Peers Configuration List
window opens.
5. Click on the IP address of the time server
that displays in the NTP Peer list.
(continued)
Site Manager Procedure
(continued)
You do this System responds
Comentarios a estos manuales