Avaya Configuring IP Utilities Manual de usuario Pagina 38

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 198
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 37
Configuring IP Utilities
1-16 117358-A Rev. A
3. Display Telnet server default settings.
server# info
on telnet
state enabled
manager-script automgr.bat
lines 24
more enabled
prompt {}
login-timeout 1
password-timeout 1
command-timeout 15
login-retries 3
auto-user-script {}
force-logout disabled
history 20
server#
To start a Telnet client on the router with default settings, begin in configuration
mode at the box-level prompt:
1. Configure a Telnet client.
telnet# client
2. Display Telnet client default settings.
client# info
on telnet
state enabled
debug-log-flag off
remote-port 23
prompt {}
client#
Using Site Manager
You can easily start Telnet services using default parameter values. If you decide
to change some or all of the defaults, refer to the instructions in Chapter 6. For a
list of Telnet parameters, see Appendix B.
Before you begin, verify that you have configured IP on an interface, as described
in “Confi
guring IP for Global Protocols,” on page 1-6.
Vista de pagina 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 197 198

Comentarios a estos manuales

Sin comentarios