
Parameter Descriptions
117358-A Rev. A A-17
NTP Global Parameters
Use the following guidelines to configure NTP parameters.
Parameter: Remote Port
Path: Protocols > Global Protocols > Telnet Client > Global
Default: 23
Options: Any valid TCP port number.
Function: Specifies the default remote Telnet server’s TCP port.
Instructions: Enter the appropriate value for the default remote Telnet server’s TCP port.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.7.2.4
Parameter: Prompt
Path: Protocols > Global Protocols > Telnet Client > Global
Default: None
Options: Any text string less than 40 characters long
Function: Specifies the default Telnet client command prompt.
Instructions: Enter any text string less than 40 characters long; for example, Router1%
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.7.2.5
Parameter: Enable/Disable
Path: Select Protocols > Global Protocols > NTP > Global
Default: Enable
Options: Enable
| Disable
Function: Enables or disables the NTP subsystem on the internet device.
Instructions: To disable the NTP subsystem on the internet device, specify Disable and click
on OK in the Edit NTP Global Parameters window.
MIB Object ID: 1.3.6.1.4.1.1.18.3.5.3.17.1.1.3
Comentarios a estos manuales