Avaya Configuring IP Utilities Manual de usuario Pagina 30

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 198
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 29
Configuring IP Utilities
1-8 117358-A Rev. A
Starting TCP Services
You can use the BCC command line interface or the Site Manager graphical user
interface to start TCP on the router, using default values for all parameters. Before
you begin, verify that you have configured IP on an interface, as described in
Confi
guring IP for Global Protocols,” on page 1-6.
Using the BCC
To configure TCP on the router with default settings, begin in configuration mode
at the box-level prompt:
1. Configure TCP.
box# tcp
2. Display TCP default settings.
tcp# info
on ip
state enabled
min-rto 250
max-rto 240000
max-win 4096
tcp#
Using Site Manager
You can easily start TCP services using default values for all parameters. If you
decide to change some or all of the default values, refer to the instructions in
Chapter 3, “Customizing TCP Services.” For a list of TCP parameters, see
Appendix B.
Before you can start TCP services, you must verify that you have configured IP on
an interface, as described in “Confi
guring IP for Global Protocols,” on page 1-6.
Vista de pagina 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 197 198

Comentarios a estos manuales

Sin comentarios