Avaya IP Telephony Guía de configuración descargar pdf (Pagina 66)

66 Chapter 3 Installing IP telephones

P0604630 03

Configuring a new time zone on a remote telephone

If the IP telephone connects to the system from a different time zone than the Business

Communications Manager, you can reset the telephone so that it displays the correct local time.

1 At the telephone, enter FEATURE *510.

2 Press

CHANGE.

3 Press * to toggle between + and - (minus), depending on which side of the time zone the

telephone is located. As a rule of thumb, west is minus (-); east is plus (+)

4 Enter the number of hours difference.

5 Press

OK.

Offset time zones: For areas, such as Newfoundland, Canada, where the time zone is offset from a

full hour, press the # key to add .5 to the number of hours, then press

OK.

Note: The telephone is still configured to change when Daylight Savings Time occurs if the host

Business Communications Manager is programmed to change. Therefore, if the telephone is in an

area that does not change time, for example, Saskatchewan, Canada, you will need to readjust the

time on your IP telephone at each time change. You will also need to readjust the time if the IP

telephone is in a time zone that changes and the Business Communications Manager is not, for

example, if the telephone is in Alberta, Canada and the Business Communications Manager is

located in the business headquarters in Saskatchewan.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 211 212

Sin comentarios

Avaya IP Telephony Guía de configuración Pagina 66