Avaya IP Telephony Guía de configuración Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 212
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
Chapter 1 Introduction 21
IP Telephony Configuration Guide
Creating the IP telephony network
This section explains the components of the Business Communications Manager 3.5 system and
the devices it interoperates to create a network.
This section includes information about:
“Networking with Business Communications Manager 3.5” on page 23
“M1-IPT” on page 23
“Telephones” on page 23
“Gatekeepers on the network” on page 24
“IP network” on page 24
“Public Switched Telephone Network” on page 25
The following figure shows components of a Business Communications Manager 3.5 network
configuration.
In this example, two Business Communications Manager systems are connected both through a
PSTN connection and through a WAN connection. The WAN connection uses VoIP trunks. If the
PSTN connections use dedicated ISDN lines, the two systems have backup private networks to
each other. Both Business Communications Manager systems use VoIP trunks through a common
WAN to connect to the Meridian (M1-IPT) system.
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 211 212

Comentarios a estos manuales

Sin comentarios