Avaya Configuring BayStack Remote Access Manual de usuario Pagina 76

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 75
Configuring BayStack Remote Access
4-6 117341-A Rev. A
Table 4-2. ifconfig Command Options for a Synchronous Interface
Option Description
-d Resets the BayStack router’s IP interface options to the default
values. This option tries four WAN configurations in the following
order, until it finds the correct type for the router’s connection to the
network:
1. Bay Networks HDLC encapsulation (also called
Bay Networks Standard PPP) with external clocking
2. Frame Relay Annex D
3. Frame Relay LMI
4. Frame Relay Annex A
-fr Configures the BayStack router’s synchronous port as a Frame Relay
connection. With this option, use one of the following options to
specify a DLCMI option: -annexd,
-
annexa, or -lmi.
-annexd
-annexa
-lmi
When one of these options is used with the -fr option, it specifies a
DLCMI option. Use the same option as the network to which the
BayStack router’s Frame Relay interface is connected. The default
option for Frame Relay is -annexd.
-int_clk Sets the synchronous port to internal clocking at 1.25 MB/s. If you do
not specify this option, the router defaults to external clocking.
<interface>
Specifies the IP connector you are configuring. Use the format
com<
port no.
>.
<IP address>
Specifies the IP address of the interface you set with
<interface>
.
Provide this address in dotted-decimal notation.
<subnet mask>
Specifies the IP subnet mask of the interface you set with
<interface>
.
Provide this address in dotted-decimal notation.
<next hop
address>
Specifies the IP address of the next-hop router. Provide this address
in dotted-decimal notation. Specify this address only if there are
intermediate routers between the BayStack router and the BootP
server.
Vista de pagina 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 167 168

Comentarios a estos manuales

Sin comentarios