Avaya Configuring BayStack Remote Access Manual de usuario Pagina 128
- Pagina / 168
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Configuring BayStack Remote Access
B-4 117341-A Rev. A
Router Not Sending BootP Responses
If a router between the BayStack router and the BootP server is receiving BootP
requests but is failing to send BootP responses, do the following:
1. Use Site Manager to ensure that the BootP relay agent forwarding table
associated with the router shows an IP address that is configured on the
IP router.
2. Ensure that the input IP address is correct. If the Hops count is lower
than the router’s position in the path, increase the Hops count.
See “Creating the BootP Client Interface Table” in Chapter 3 for instructions.
3. Use the Configuration Manager to ensure that BootP and IP are enabled
on the incoming and outgoing interfaces.
4. Ensure that the link modules and drivers are enabled. See Configuring
and Managing Routers with Site Manager for instructions.
BootP Server Not Sending BootP Responses
If the BootP server is receiving BootP requests but is failing to respond to them,
do the following:
1. Follow the instructions in “Displaying the BootP Server IP Routes” on
pa
ge B-15.
2. Follow the instructions in “Debugging the BootP Server” on page B-12.
3. Ensure that the /etc/inetd.conf file contains no more than one bootps
entry.
If there is more than one entry, comment out the invalid entry. The valid entry
is as follows:
bootps dgram udp wait root /etc/bootpd bootpd
4. Ensure that the tftp dgram entry in the /etc/inetd.conf file is correct for
your system.
See “Setting Up a TFTP Server” in Chapter 2 for instructions.
5. See “Verifying the BootP Server Setup” on page B-14.
- Configuring BayStack 1
- Remote Access 1
- Contents 5
- 117341-A Rev. A 10
- About This Guide 15
- Before You Begin 16
- Conventions 16
- Acronyms 17
- Bay Networks Customer Service 19
- How to Get Help 20
- Chapter 1 21
- Startup Files 22
- Startup Options 23
- 1-4 117341-A Rev. A 24
- The Boot Process 25
- 1-6 117341-A Rev. A 26
- Standard PPP) 27
- 117341-A Rev. A 1-9 29
- 117341-A Rev. A 1-11 31
- 1-12 117341-A Rev. A 32
- 117341-A Rev. A 1-13 33
- 1-14 117341-A Rev. A 34
- 117341-A Rev. A 1-15 35
- Recommendations 36
- Directed Netboot 37
- Local Boot 38
- EZ-Install 39
- Chapter 2 43
- Setting Up a UNIX Boot Server 43
- Setting Up a BootP Server 44
- 117341-A Rev. A 2-3 45
- 2-6 117341-A Rev. A 48
- Setting Up a TFTP Server 50
- <user_id> 52
- <group_no.> 52
- Rebooting Your Workstation 53
- Issuing a Hang-Up Signal 53
- What to Do Next 54
- Chapter 3 55
- Creating Configuration Files 56
- 3-4 117341-A Rev. A 58
- (continued) 59
- (continued) 60
- Preparing an Image 61
- 3-8 117341-A Rev. A 62
- 3-10 117341-A Rev. A 64
- Enabling Router Interfaces 65
- 3-12 117341-A Rev. A 66
- for a description of the 67
- 3-14 117341-A Rev. A 68
- Chapter 4 71
- Setting the Boot Configuration 73
- <interface> 75
- <next hop address> 75
- 4-6 117341-A Rev. A 76
- <interface> 77
- <port no.> 79
- Verifying Your Configuration 80
- Chapter 5 83
- Managing ANH Repeater Ports 83
- 5-2 117341-A Rev. A 84
- 5-4 117341-A Rev. A 86
- Chapter 6 89
- Remote Monitoring (RMON) 90
- RMON Groups 91
- 6-4 117341-A Rev. A 92
- 117341-A Rev. A 6-5 93
- 6-6 117341-A Rev. A 94
- Enabling a DCM 95
- Activating the DCM 96
- Disabling the DCM 97
- Booting the DCM 98
- 6-12 117341-A Rev. A 100
- 117341-A Rev. A 6-13 101
- RMON Implementation Notes 102
- RMON Applications 103
- RMON Memory Use 104
- 117341-A Rev. A 6-17 105
- 6-18 117341-A Rev. A 106
- 117341-A Rev. A 6-19 107
- 6-20 117341-A Rev. A 108
- 117341-A Rev. A 6-21 109
- Appendix A 111
- Site Manager Parameters 111
- 112
- Netboot Interface Parameters 114
- 115
- A-8 117341-A Rev. A 118
- 119
- DCM Global Parameters 120
- 121
- 122
- 122
- Appendix B 125
- B-2 117341-A Rev. A 126
- Router Fails to Netboot 127
- 117341-A Rev. A B-5 129
- <connector> 131
- B-8 117341-A Rev. A 132
- get and log commands 132
- 117341-A Rev. A B-9 133
- Displaying Parameter Settings 134
- Debugging the BootP Server 136
- <rel> 138
- <IP_address> 139
- Upgrading the Software Image 141
- Restoring a Local File System 142
- Hints and Notes 143
- Implementation Notes 144
- Appendix C 145
- What Is Quick-Start? 146
- Using the Worksheets 146
- 117341-A Rev. A C-3 147
- Global Information Worksheet 148
- Router Protocol Worksheets 150
- RIP Worksheet 151
- OSPF Worksheet 151
- C-8 117341-A Rev. A 152
- Wide Area Protocol Worksheets 154
- Frame Relay Worksheet 155
- PPP Worksheet 155
- C-12 117341-A Rev. A 156
- 117341-A Rev. A Index-1 161
- 117341-A Rev. A Index-3 163
- 117341-A Rev. A Index-5 165
- 117341-A Rev. A Index-7 167
Relacionado con productos y manuales para Routers Avaya Configuring BayStack Remote Access
Routers Avaya 1603SW-I Manual de instalación
(74 paginas)
(74 paginas)
Routers Avaya Configuring OSI Services Manual de usuario
(124 paginas)
(124 paginas)
Routers Avaya BayRS Version 13.00 (Japanese) aviso
(64 paginas)
(64 paginas)
Routers Avaya BayRS and BCC Version 15.5.1.1 Fixed Anomalies (316151-15.5.1.1 Rev 00) Manual de usuario
(5 paginas)
(5 paginas)
Routers Avaya Configuring Remote Access for AN and Passport ARN Routers Manual de usuario
(142 paginas)
(142 paginas)
Routers Avaya BCM50 Manual de usuario
(82 paginas)
(82 paginas)
Routers Avaya BCM50 Manual de usuario
(26 paginas)
(26 paginas)
Routers Avaya BCM50 Manual de instalación
(335 paginas)
(335 paginas)
Routers Avaya BCM50e Manual de usuario
(311 paginas)
(311 paginas)
Routers Avaya Cable Manual de usuario
(194 paginas)
(194 paginas)
Routers Avaya FireWall-1 Manual de usuario
(60 paginas)
(60 paginas)
Routers Avaya BCM50 Manual de usuario
(50 paginas)
(50 paginas)
Routers Avaya BayRS Version 14.10 aviso
(42 paginas)
(42 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.093 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales