Avaya Configuring BayStack Remote Access Manual de usuario Pagina 122

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 121
Configuring BayStack Remote Access
A-12 117341-A Rev. A
Parameter: Configuration Mode
Path: Configuration Manager > Platform > DCM 11.0 and Later >
Create Base Module DCM
Default: LOCAL
Options: LOCAL
| SHARED MEMORY
Function: Specifies whether to use the configuration information in DCM shared memory
(DRAM) or the configuration information saved on the DCM’s flash memory
SIMM.
Instructions: Select LOCAL to use the default configuration information in the DCM’s flash
memory. Select SHARED MEMORY to use the configuration information from
the BayStack router’s flash memory, stored in DCM DRAM.
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.16.2.1.10
Parameter: Save Configuration Info
Path: Configuration Manager > Platform > DCM 11.0 and Later >
Create Base Module DCM
Default: WRITE
Options: WRITE
| NO WRITE
Function: Specifies whether to write the configuration information in DCM DRAM to the
DCM’s flash memory SIMM.
Instructions: Select WRITE to save the configuration information in DRAM to the DCM’s
flash memory SIMM (overwriting the existing configuration file). Select NO
WRITE to avoid overwriting the DCM configuration file.
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.16.2.1.11
Vista de pagina 121
1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 167 168

Comentarios a estos manuales

Sin comentarios