Avaya Configuring BayStack Remote Access Manual de usuario Pagina 32

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 31
Configuring BayStack Remote Access
1-12 117341-A Rev. A
Local Boot Process
When the BayStack router boots locally, it reads the kernel, application, and string
les embedded in the an.exe or arn.exe software image file on the local PCMCIA
ash memory card.
When you use Local Boot as the initial boot option, you boot a default (generic)
configuration file. You must then run the Quick-Start installation script to
customize the default configuration file. Running the installation script establishes
an IP network interface between the BayStack router and a Site Manager
workstation (F
igure 1-6).
Figure 1-6. Establishing an IP Network Interface
IP address = 192.32.10.12
Site Manager
workstation
ASCII console or PC
BayStack router
Console port
IP address = 192.32.156.7
Subnet mask = 255.255.255.0
Ethernet port
Corporate IP network
NPA0006A.EPS
Vista de pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 167 168

Comentarios a estos manuales

Sin comentarios