Avaya Configuring BayStack Remote Access Manual de usuario Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
Understanding Tools and Options
117341-A Rev. A 1-19
You can use Netboot for some procedures and Local Boot for others, provided you
have set up the network to support Netboot.
EZ-Install
Complete the following steps for the EZ-Install option:
1. Use the Configuration Manager in local mode to create a complete
configuration file for the BayStack router. (See Cha
pter 3 and Configuring
and Managing Routers with Site Manager.)
2. Set up a UNIX workstation on the network to support BootP. (See Chapter 2.)
3. Create a BootP client on the upstream router to support automated addressing,
and configure all routers between the BootP server and the BayStack router as
BootP relay agents. (See Cha
pter 3.)
4. Ensure that there is a network connection from a synchronous interface on the
BayStack router to the upstream router.
5. A person at the BayStack router site installs and turns on the router. (See the
model-specific hardware installation manual.)
The BayStack router obtains a software image from its local file system, an IP
address from the upstream router, and the customized configuration file from
the BootP server. (“T
he Boot Process” on page 1-5 describes this process; no
action is required.)
If the configuration file meets your network requirements, the BayStack
router starts bridging and routing traffic.
6. Use the Site Manager Statistics Manager and Events Manager tools to verify
that the BayStack router is routing traffic as specified in the configuration file.
(See Configuring and Managing Routers with Site Manager.)
Note: To boot the BayStack router over the network, all routers in the path to
the BootP server must be running BayRS Version 7.60 or later.
Note: If the BayStack router will connect to the upstream router over a Frame
Relay circuit, ensure that the upstream router is running BayRS Version 7.80
or later.
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 167 168

Comentarios a estos manuales

Sin comentarios