Avaya Configuring BayStack Remote Access Manual de usuario Pagina 140

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 139
Configuring BayStack Remote Access
B-16 117341-A Rev. A
Displaying the Number of Packets Forwarded and Dropped
This section describes how to display the number of BootP packets forwarded and
dropped by a router. Perform this procedure for each router between the BayStack
router and the BootP server.
You can use either the Statistics Manager Quick Get tool or the Technician
Interface
get command to retrieve this information. See Configuring and
Managing Routers with Site Manager for additional information about Quick Get.
Quick Get Instructions
1. Select the following path:
wfApplication/wfInternet/wfBootpGroup/wfBootpRelayAgentGroup/
wfBootpRelayIntfTable
2. To display the number of packets forwarded, select the following:
wfBootpRelayIntfRequests
3. To display the number of packets dropped, select the following:
wfBootpRelayIntfHopsDrops
Technician Interface Instructions
Enter the following command to display information that may help you determine
if and why a device is dropping packets, where <IP_address> is the address of the
interface receiving the packets:
get wfBootpRelayIntfEntry.*.
<IP_address>
Vista de pagina 139
1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 167 168

Comentarios a estos manuales

Sin comentarios