
DECNET Events
3-73
Entity Code/Event Code 4/20
Decimal Identifier 16778260
Severity: Warning
Message: Adjacency Down Circuit <circuit_no.>, Adjacency=<area>.<node>, Version skew
Meaning: The adjacent node whose address is <area>.<node> (previously accessible through the
identified circuit) is determined to be down because of a DECnet version mismatch
between the local router and the adjacency.
Action: Reconcile the version mismatch.
Entity Code/Event Code 4/23
Decimal Identifier 16778263
Severity: Warning
Message: Adjacency Rejected Circuit <circuit_no.>, Adjacency=<area>.<node>, Router Table
Full
Meaning: DECnet IV has detected a router whose address is <area>.<node> (potentially accessible
through the identified circuit). DECnet IV will not establish an adjacency, because its
Adjacent Router table is full and the “priority” (node number) of the newly detected router
is less than that of the lowest-priority node in the table.
Action: Consider setting the NBRA value to its maximum value (33).
Entity Code/Event Code 4/24
Decimal Identifier 16778264
Severity: Warning
Message: Adjacency Rejected Circuit <circuit_no.>, Adjacency=<area>.<node>, Out of range
Meaning: DECnet IV has detected a router whose address is <area>.<node> (potentially accessible
through the identified circuit). DECnet IV will not establish an adjacency, because the
newly detected router’s area or node address, or both, exceeds the maximum values
configured for these parameters.
Action: Verify the address integrity or modify the DECnet configuration record, or both.
Comentarios a estos manuales