
Event Messages for Routers and BNX Platforms
2-118
Entity Code/Event Code 76/163
Decimal Identifier 16796835
Severity: Warning
Message: Lost event(s) due to coprocessor log overflow.
Meaning: The ATM driver running on the motherboard gathers log events from the driver running on
the link module coprocessor. The ATM driver has missed an event that the link driver
logged.
Action: No action is necessary; however, be aware that the log may be missing some events.
Entity Code/Event Code 76/164
Decimal Identifier 16796836
Severity: Warning
Message: Lost string variable in previous event due to coprocessor log overflow.
Meaning: The ATM driver running on the motherboard gathers log events from the driver running on
the link module coprocessor. The ATM driver has missed an event that the link driver
logged.
Action: No action is necessary; however, be aware that the log may be missing some events.
Entity Code/Event Code 76/165
Decimal Identifier 16796837
Severity: Warning
Message: Port <port_no.>: framer alarmed (Loss of Signal), device unavailable. Check the cable.
Meaning: The ATM driver has experienced a Loss of Signal on the physical interface. This can occur
if the cable to the ATM port has been disconnected.
Action: Reconnect the cable to the ATM port and make sure that the alarm clears. If the alarm does
not clear, verify the integrity of the cable.
Entity Code/Event Code 76/166
Decimal Identifier 16796838
Severity: Warning
Message: Port <port_no.>: framer alarm cleared, device recovered.
Meaning: The ATM driver has recovered from the Loss of Signal state on the physical interface.
Comentarios a estos manuales