Avaya Upgrading Routers from Version 5 to Version 10.0 Manual de usuario descargar pdf (Pagina 45)

Continuing the Upgrade: Converting and Customizing Files

4-13

8. Select the ﬁrst available empty slot under the Description column.

A popup window displays the link module types.

9. Click on the appropriate link module. Then click on OK.

Site Manager automatically displays the connector names associated with the

link module you selected.

10. Repeat Steps 8 and 9 for each link module in the router.

11. Select File➔Save As.

The Save Conﬁguration File window appears.

12. Type conﬁghd (for conﬁg with hardware) in the Enter File Name box.

13. Select Save in the Save Conﬁguration File window. Then click on OK in

the conﬁrmation window.

Site Manager in local mode saves conﬁghd as a Version 7.56 conﬁguration

ﬁle.

Adding an IP Interface

You must conﬁgure an IP interface on the router to enable the router to support a

connection to a Site Manager workstation.

Later in the Version 5 to Version 10.0 upgrade process, you replace the default

conﬁguration ﬁle on the router with a converted or new conﬁguration ﬁle that

includes the required IP interface. You provide the IP address of this interface to

Site Manager, which can then establish a connection to the router you want to

upgrade.

If your

conﬁghd

ﬁle Then

Includes an IP interface Go to the next section, “Verifying and

Customizing Default Settings.”

Does not include an IP interface 1. Use the Configuration Manager to open the

file and add the interface.

2. Save the ﬁle.

If necessary, refer to

Conﬁguring Routers

for

instructions on how to add a new IP interface.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 87 88

Sin comentarios

Avaya Upgrading Routers from Version 5 to Version 10.0 Manual de usuario Pagina 45