Avaya SIP Software 3.2 for 1200 Series Manual de usuario descargar pdf (Pagina 109)

DHCP

There are two methods of provisioning DHCP.

1. No DHCP (Manual configuration): All the Device Settings parameters are

configured manually on the IP Deskphone with SIP Software.

2. Yes: The IP Deskphone with SIP Software is configured to get a standard set of

Device Settings parameters from the DHCP server.

NO DHCP mode

No DHCP mode is also known as Manual Device Settings. In this mode, the IP Deskphone

does not need a DHCP server because no DHCP requests are sent during startup. All

necessary parameters must be configured manually or through the device configuration file.

The minimum following parameters must be configured to achieve normal operation:

• SET IP

• Net Mask

• Gateway

• DNS IP

• Provisioning server IP, protocol, and, if user authentication is required to access the

provisioning server, the user credentials

Note: TFTP protocol does not require user authentication. Device ID and password are

ignored. FTP protocol requires user authentication and the default Device ID is

anonymous with no password.

HTTP protocol can operate with or without user authentication. If no authentication is

required, make sure to clear the Device ID and password fields in the configuration

dialogue.

SET IP

Select SET IP in the Device Settings menu to configure the IP address.

DHCP

SIP Software for Avaya 1200 Series IP Deskphones-Administration January 2012 109

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 319 320

Sin comentarios

Avaya SIP Software 3.2 for 1200 Series Manual de usuario Pagina 109