Avaya R2 Guía de usuario descargar pdf (Pagina 74)

Configuring BCMS Vu from the Server 4-7

Configuring and Managing the

BCMS Vu

Software

Chapter 4

A colored dot moves back and forth between the PC icon and the

DEFINITY system icon.

If the connection is established, the words “The test was successful”

appear.

If the connection is not successful, BCMS Vu attempts to connect until it

times out and tells you why it failed. In this case, select Cancel and

correct the problem. Refer to “Troubleshooting the Data Module” on

page 10-40, if you are using a data module to connect to the DEFINITY

system. For the DEFINITY ONE system, refer to the associated error

codes.

9. To exit the Switch Connection Configuration Wizard, select Finish.

If, however, you entered the Switch Connection Configuration Wizard

by selecting Options|Configure|First Time or if this is the first time

you have gone through the wizard, and you want to continue to the

Download Historical Data Wizard, select Next.

Connecting to and Disconnecting from the DEFINITY

System 4

BCMS Vu Server normally remains connected for as long as both BCMS Vu

Sever and the DEFINITY system are running.

Note

If the connection to the DEFINITY system is dropped, for

whatever reason, a Communications Error window appears

offering you the following options:

• Retry the connection

• Cancel the connection.

The program attempts to reconnect. If it does not reconnect

and you do not select Cancel, the program attempts to

reconnect again after thirty seconds, offering the same

options. It tries again after a minute, then after two minutes,

four minutes, and so forth. It continues trying to reconnect

indefinitely at larger and larger intervals, until it is

successful or you select Cancel.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 278 279

Sin comentarios

Avaya R2 Guía de usuario Pagina 74