
10-54 Error Codes
Troubleshooting
7001 Internal software error Contact Lucent Technologies.
7011 The process you were trying to
contact is missing, hung, or
unable to complete the operation
in time.
Make sure the process is running
properly. Retry the operation.
Restart the process if necessary.
Note: if the problem is a
DEFINITY system connection,
try powering down the data
module and powering it up
again.
7012 Internal software error. Contact Lucent Technologies.
7013 The login attempt has failed or
timed out.
Check password and login for
BCMS Vu and the DEFINITY
system.
7014 Call not completed. The device
could not be connected to.
Verify that the hunt group
extension for Netcon channels is
correct.
7015 Unknown exception (caught by
default)
Retry the operation. Contact
Lucent Technologies.
7101 Serial port does not exist. Check the serial port (COM Port)
selection under
Options|Configure|
Switch Connection.
7102 Serial port in use Find out what else could be
using the Serial port. If nothing
is, try restarting the Connection
Server. Refer to
“Troubleshooting” in this
chapter.
7103 Serial port failure Make sure the data module or
wallboard is securely plugged in.
Refer to “Troubleshooting” in
this chapter.
ID Description Resolution
Comentarios a estos manuales