Avaya Connecting BayStack AN and ANH Platforms to a Network Manual de usuario Pagina 61

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 178
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 60
Setting Up a UNIX Boot Server
114074 Rev. A 3-7
The sample bootptab file in Figure 3-1 enables two ANs (named “AN.Boston”
and “AN.Chicago”) to boot across the network. Use the basic format shown in
Figure 3-1 to set up your own bootptab file.
# This file contains the default specification for the boot
# image file to be used by all ANs.
# "general" contains information that is common to all ANs
# that need to boot via BOOTP. You can use any word in place
# of "general."
general:\
# "hd" specifies that /$HOME/.builder_dir/rel900/an is the
# directory on the workstation where the boot files are
# located. By default, the Image Builder writes its files to
# this directory. If you are using a router software version
# later than 8.00, add the associated three digits to the end
# of the "rel" directory name. If you moved the files to
# another directory, specify that directory.
:hd=/$HOME/.builder_dir/rel812/an:\
# "bf" specifies that the name of the boot image kernel file
# is krnl_an.exe.
:bf=krnl_an.exe:\
# "bs" indicates the size of the boot file. If you specify
# "auto" as the size, the BOOTP server calculates the size of
# the file for each BOOTP request.
:bs=auto:\
bs Required Boot size -- the size of the boot file
in 512-octet blocks. If you specify
auto as the size, the BOOTP
server calculates the size of the
file for each BOOTP request.
bs=auto
vm Required Vendor magic cookie selector
--
the BOOTP server should always
reply in a manner compliant with
RFC 1048. You must enter
rfc1048 for this tag, so that the
router can understand the BOOTP
responses it receives.
vm=rfc1048
Table 3-2. BOOTPD Tags for a Boot Image Name
(continued)
Tag
Required
or Optional Value Example
Vista de pagina 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 177 178

Comentarios a estos manuales

Sin comentarios