Avaya Connecting BayStack AN and ANH Platforms to a Network Manual de usuario Pagina 52

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 178
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 51
Connecting BayStack AN and ANH Systems to a Network
2-8 114074 Rev. A
After the router boots, it gets the software image and configuration file from
the BOOTP server.
If the configuration file meets your network requirements, the router starts
bridging and routing traffic.
You can use the Site Manager Statistics Manager and Events Manager tools to
verify that the router is routing traffic according to the configuration you want.
(See Managing Routers and BNX Platforms.)
Directed Netboot
Completing the Directed Netboot option requires the following steps:
1. You use the Configuration Manager in local mode to create a complete
configuration file for the router.
(See
Chapter 4 and Configuring Routers.)
2. You set up the network to support TFTP.
(See
Chapter 3.)
3. You ensure that there is a network connection from a synchronous or
Ethernet interface on the AN/ANH to the upstream router.
4. The person at the AN/ANH site establishes a Technician Interface session
(or you establish a session via modem).
(See Installing and Operating BayStack AN and ANH Systems.)
5. The person at the AN/ANH console issues bconfig and ifconfig
commands to configure a synchronous or Ethernet interface for Directed
Netboot.
(See
Chapter 5 if you are using a remote Technician Interface session, or, if at
the router site, Installing and Operating BayStack AN and ANH Systems.)
6. You install the netboot.exe file in the BOOTP server’s file system, and
make sure the image and application files reside in the specified directory.
(See
Chapter 3.)
Note: If the AN/ANH will connect to the upstream router using a Frame
Relay circuit, be sure the upstream router is running Router Software Version
8.00 or higher.
Vista de pagina 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 177 178

Comentarios a estos manuales

Sin comentarios