Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario Pagina 74

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 162
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 73
Configuring Traffic Filters and Protocol Prioritization
4-8 117348-A Rev. A
IP Reference Points
Table 4-4 defines the reference points in the IP header from which you can build
user-defined criterion. Figure 4-
5 shows an example of where those reference
points are located in a packet.
Figure 4-5. IP Reference Points in an IP-Encapsulated SRB Packet Bridged over PPP
Table 4-4. IP Reference Points
Reference Point Definition
HEADER_START Points to the first byte in the IP header
HEADER_END Points to the first byte following the IP header
IP_WAN_HEADER_START Points to the beginning of the header (beginning
of the packet) for PPP and Frame Relay packets
IP_WAN_HEADER_END Points to the first byte following the DLCI in a
Frame Relay packet, and the first byte following
the protocol ID in a PPP packet
IP_SR_START Points to the beginning of the SRB packet, which
is the high-order byte of the destination address
IP_SR_DATA_LINK Points to the first byte following the RIF
DSAP
DA SP RIF
SSAP CONTROL
IP_WAN_HEADER_START
IP_WAN_HEADER_END
HEADER_END
HEADER_START
IP_SR_DATA_LINK
IP_SR_START
0x3000UDP
00000003 4521
FF
TF0010A
Vista de pagina 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 161 162

Comentarios a estos manuales

Sin comentarios