Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario Pagina 137

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 162
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 136
Site Manager Protocol Prioritization Parameters
117348-A Rev. A A-5
Parameter: High Queue Percent Bandwidth
Path: Configuration Manager >
interface connector
> Edit Circuit > Protocols >
Edit Protocol Priority > Interface
Default: 70 percent
Options: 0 to 100 percent
Function: If you select the bandwidth allocation dequeuing algorithm, this parameter
specifies the percentage of the synchronous line’s bandwidth allocated to traffic
that has been sent to the High queue. When you set this parameter to a value less
than 100, each time the percentage of bandwidth used by high-priority traffic
reaches this limit, the router transmits traffic in the Normal and Low queues, up
to the configured percentages for those priority queues.
Instructions: Specify the percentage of the line’s bandwidth allocated to high-priority traffic.
The High Queue, Normal Queue, and Low Queue Percent Bandwidth values
must total 100.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.1.1.25
Parameter: Normal Queue Percent Bandwidth
Path: Configuration Manager >
interface connector
> Edit Circuit > Protocols >
Edit Protocol Priority > Interface
Default: 20 percent
Options: 0 to 100 percent
Function: If you select the bandwidth allocation dequeuing algorithm, this parameter
specifies the percentage of the synchronous line’s bandwidth allocated to
normal-priority traffic.
Instructions: Specify the percentage of the line’s bandwidth allocated to normal-priority
traffic. The High Queue, Normal Queue, and Low Queue values must total 100.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.1.1.26
Vista de pagina 136
1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 161 162

Comentarios a estos manuales

Sin comentarios