Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario Pagina 128

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 162
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 127
Configuring Traffic Filters and Protocol Prioritization
7-20 117348-A Rev. A
Specifying User-Defined Criteria
The Edit Priority/Outbound Filters window and Edit Priority/Outbound Template
window provide a User-Defined criterion option.The User-Defined option allows
you to set up a user-defined criterion based on bit patterns in the packet’s data link
or IP header that are not supported in predefined criteria.
Adding user-defined criteria is similar to adding predefined criteria, except you
must specify the criterion’s location in the packet. (With predefined criteria, the
locations are established.)
See Cha
pter 4 for the supported IP and data link header reference points you can
use to specify user-defined criteria for outbound traffic filters.
To add a user-defined criterion:
Site Manager Procedure
You do this System responds
1. Display the Edit Priority/Outbound
Template window (Figure
7-6) or Edit
Priority/Outbound Filters window
(Figure
7-8).
2. Choose Criteria > User-Defined. The Add User-Defined Field window
opens (Figure 7-9).
3. In the REF field, choose the header
reference point.
4. In the OFFSET field, specify a bit offset
from the reference point.
5. In the LENGTH field, specify the length of
the criterion.
6. In the Minimum value and Maximum value
fields, specify a range for the criterion.
7. Click on OK. The Edit Priority/Outbound Template
window or Edit Priority/Outbound Filters
window opens.
8. Continue editing the template or filter.
See T
able 7-1, “Using the Edit
Priority/Outbound Template Window, or
T
able 7-2, “Using the Edit Priority/Outbound
Filters Window.”
Vista de pagina 127
1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 161 162

Comentarios a estos manuales

Sin comentarios