
Configuring IP Utilities
4-2
308631-14.00 Rev 00
Configuring FTP Using the BCC or Site Manager
Table 4-1 lists the FTP configuration tasks described in this chapter and indicates
whether you can use the BCC or Site Manager to perform each task.
Disabling and Reenabling FTP
After you configure IP and start FTP, all FTP default values are automatically
enabled on the router.
Using the BCC
To disable FTP, navigate to the FTP prompt and enter:
disable
For example, this command line disables the FTP server on the router.
ftp#
disable
ftp#
To reenable FTP, navigate to the FTP prompt and enter:
enable
Table 4-1. FTP Configuration Tasks
Task BCC Site Manager
Disabling and Reenabling FTP
✓✓
Specifying the FTP Default Volume
✓✓
Specifying the Number of Login Retries
✓✓
Specifying the Maximum FTP Idle Timeout
✓✓
Specifying the Maximum Number of FTP Sessions
✓✓
Specifying the Data Transmission Type
✓
Specifying the FTP Control Connection
✓
Specifying a Data Transfer Value
✓
Specifying the TCP Window Size
✓✓
Comentarios a estos manuales