Avaya Configuring IP Utilities Manual de usuario Pagina 32
- Pagina / 228
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Configuring IP Utilities
1-10
308631-14.00 Rev 00
Starting NTP Services
You can use the BCC or Site Manager to configure NTP on the router, accepting
default values for all parameters. If you decide to change some or all of the default
values, see Chapter 7, “Customizing NTP Services.”
Before you begin, verify that:
• IP is configured on an interface. For instructions, see “Configuring IP for
Global Protocols” on page 1-2.
• The remote time servers that you want to configure on the network are
reachable via IP.
To do this, you must ping the IP address of the time server that you want to
configure. If the time server is not on the local network, you must configure
the appropriate IP routing protocol, such as RIP or OSPF. For information
about configuring routing protocols, see Configuring IP, ARP, RARP, RIP, and
OSPF Services.
Using the BCC
To start NTP services on the router with default settings, begin in configuration
mode at the box or stack prompt:
1.
Configure NTP
.
box#
ntp
ntp#
2.
Display NTP default settings
.
ntp#
info
state enabled
ntp#
- Configuring IP Utilities 1
- Trademarks 2
- Restricted Rights Legend 2
- Statement of Conditions 2
- Contents 5
- 308631-14.00 Rev 00 10
- Before You Begin 17
- Text Conventions 18
- Acronyms 19
- Hard-Copy Technical Manuals 21
- How to Get Help 21
- Chapter 1 23
- Starting IP Utilities 23
- Starting Configuration Tools 24
- Starting TCP Services 26
- Starting FTP Services 27
- Starting TFTP Services 28
- Starting Telnet Services 30
- Starting NTP Services 32
- Starting NetBIOS over IP 33
- Starting the DNS Client 34
- Starting the DNS Proxy Server 37
- Chapter 2 39
- Overview of IP Utilities 39
- How TCP Works 40
- TCP Features 41
- TCP and IP Service Users 44
- FTP Overview 45
- How FTP Works 46
- Networks routers 47
- TFTP Overview 48
- Telnet Overview 49
- Telnet Server 50
- Telnet Client 51
- Figure 2-4. Telnet Client 52
- NTP Overview 53
- NTP Modes of Operation 56
- NetBIOS Overview 58
- NetBIOS in an IP Environment 59
- DNS Overview 62
- DNS Proxy Server 62
- How the DNS Cache Works 64
- Chapter 3 65
- Customizing TCP Services 65
- Disabling and Reenabling TCP 66
- Chapter 4 73
- Customizing FTP Services 73
- Disabling and Reenabling FTP 74
- Chapter 5 83
- Customizing TFTP Services 83
- Deleting TFTP from the Router 89
- Chapter 6 91
- Pausing Telnet Console Output 99
- Using the BCC 100
- Using Site Manager 100
- Changing the Login Timeout 101
- Changing the Password Timeout 102
- Changing the Command Timeout 103
- Changing Login Retries 104
- Customizing Telnet Services 107
- Changing the History File 109
- Changing the Remote Port 112
- Changing the Command Prompt 113
- prompt system1 114
- Chapter 7 115
- Customizing NTP Services 115
- Disabling and Reenabling NTP 116
- Adding Remote Time Servers 119
- Setting Local Host Mode 122
- Specifying Peer Preference 124
- Chapter 8 131
- Customizing NetBIOS over IP 131
- Configuring a NetBIOS Cache 134
- 15-character entity 135
- Aging a Cache Entry 137
- Customizing a Cache Search 138
- Chapter 9 147
- Customizing the DNS Client 147
- Disabling the Recursion Bit 151
- Modifying the DNS Server List 153
- Chapter 10 159
- Customizing the DNS Proxy 159
- Appendix A 161
- Site Manager Parameters 161
- Caution: 162
- TCP Global Parameters 163
- FTP Global Parameters 165
- TFTP Parameters 168
- NTP Parameters 177
- NetBIOS Global Parameters 181
- DNS Global Parameters 189
- DNS Server Record Parameters 193
- DNS Proxy Server Parameters 194
- IP Accounting Parameters 203
- Appendix B 205
- Configuring IP Accounting on 205
- (continued) 207
- Appendix C 209
- Specifying the IP Service 210
- Specifying the Policy Action 211
- Specifying the Precedence 211
- <ip_address/ip_mask> 212
- <state> 212
- Appendix D 215
- BCC show Commands 215
- Online Help for show Commands 216
- The output 222
Relacionado con productos y manuales para Software Avaya Configuring IP Utilities
Software Avaya 1010/1020 Manual de usuario
(32 paginas)
(32 paginas)
Software Avaya Call Center Manual de usuario
(274 paginas)
(274 paginas)
Software Avaya Bay Command Console Manual de usuario
(140 paginas)
(140 paginas)
Software Avaya FireWall-1 Manual de usuario
(38 paginas)
(38 paginas)
Software Avaya 4600 Series Nota de aplicación
(206 paginas)
(206 paginas)
Software Avaya 4600 Series IP Telephone Guía de usuario
(188 paginas)
(188 paginas)
Software Avaya BCM50 Guía de configuración
(90 paginas)
(90 paginas)
Software Avaya Contact Center Manual de usuario
(252 paginas)
(252 paginas)
Software Avaya BSG8/12 1.0 Manual de usuario
(168 paginas)
(168 paginas)
Software Avaya Remote Feature Activation Getting Started with Remote Feature Activation (RFA) Manual de usuario
(62 paginas)
(62 paginas)
Software Avaya Connecting ASN Routers and BNX Platforms to a Network Manual de usuario
(106 paginas)
(106 paginas)
Software Avaya Business Communications Manager - Personal Call Manager Guía de usuario
(104 paginas)
(104 paginas)
Software Avaya Message Networking Manual de usuario
(82 paginas)
(82 paginas)
Software Avaya BayRs Version 12.20 Manual de usuario
(218 paginas)
(218 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.046 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales