
Site Manager Parameters
308631-14.00 Rev 00
A-5
FTP Global Parameters
Use the following guidelines to configure the parameters in the Edit FTP Global
Parameters window.
Parameter: Enable/Disable
Path: Configuration Manager > Protocols > Global Protocols > FTP > Global
Default: Enable
Options: Enable
|
Disable
Function: Specifies whether the FTP subsystem is enabled or disabled.
Instructions: Specify Disable if you want to disable FTP on the router.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.10.1.2
Parameter: Default Volume
Path: Configuration Manager > Protocols > Global Protocols > FTP > Global
Default: 2
Options: 1 to 13
|
1a to 4a
|
1b to 4b
Function: Specifies the number of the file system volume to which FTP writes transferred
files and from which FTP retrieves files for transfer.
Instructions: Specify the appropriate volume number. If you are configuring an AN router,
you must specify 1.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.10.1.3
Parameter: Login Retries
Path: Configuration Manager > Protocols > Global Protocols > FTP > Global
Default: 3
Options: 0 to 5 retries
Function: Specifies the number of FTP login retries allowed after a login failure.
Instructions: Enter a value representing the number of login attempts that FTP will accept
after a login failure before rejecting logins.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.10.1.4
Comentarios a estos manuales