
Starting IP Utilities
308631-14.00 Rev 00
1-5
3.
Display TCP default settings.
tcp# info
min-rto 250
max-rto 240000
max-win 4096
state enabled
tcp#
Using Site Manager
To start TCP services, complete the following tasks:
Starting FTP Services
You can use the BCC or Site Manager to configure FTP on the router, accepting
default values for all parameters. If you decide to change some or all of the default
values, see Chapter 4, “Customizing FTP Services.”
Before you begin, verify that IP is configured on an interface. For instructions, see
“Configuring IP for Global Protocols
” on page 1-2.
Using the BCC
To start FTP on the router with default settings, begin in configuration mode at the
box or stack prompt:
1.
Configure FTP.
box# ftp
ftp#
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
Global Protocols
. The Global Protocols menu opens.
3. Choose
TCP
. The TCP menu opens.
4. Choose
Create TCP
. You return to the Configuration Manager
window.
Comentarios a estos manuales