
Starting IP Utilities
308631-14.00 Rev 00
1-7
Using the BCC
To start TFTP on the router with default settings, begin in configuration mode at
the box or stack prompt:
1.
Configure TFTP
.
box# tftp
tftp#
2.
Display TFTP default settings
.
tftp# info
default-volume 2
retry-timeout 5
close-timeout 25
retry-count 5
state enabled
tftp#
Using Site Manager
To start TFTP from Site Manager, first complete the following tasks in local mode
to create a configuration file:
After you create the configuration file, you must transfer this file to the router for
TFTP to be enabled.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
TFTP
. A confirmation window opens.
4. Choose
Create
. You return to the Configuration Manager
window.
Comentarios a estos manuales