Avaya Configuring IP Utilities Manual de usuario Pagina 188

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 228
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 187
Configuring IP Utilities
A-28
308631-14.00 Rev 00
Parameter: NetBIOS Station Name
Path: Configuration Manager > Protocols > IP > NetBIOS > Static Name > Add
Default: None
Options: A name string of up to 16 characters
Function: Specifies the name of a NetBIOS station.
Instructions: Enter the NetBIOS name you want to add. The name must not exceed 16
characters. The system pads names shorter than 16 characters with ASCII
space characters. To enter non-ASCII values in the name, use the form \xbb,
where bb can be any two hexadecimal digits.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.11.4.1.4
Parameter: NetBIOS Scope ID
Path: Configuration Manager > Protocols > IP > NetBIOS > Static Name
Default: None
Options: A NetBIOS scope identifier
Function: Identifies the area of the network across which the NetBIOS name is known.
Instructions: Enter a name string that meets the requirements of the Domain Name System
as described in RFC 833.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.11.4.1.5
Parameter: IP Address
Path: Configuration Manager > Protocols > IP > NetBIOS > Static Name > Add
Default: None
Options: The IP address of the NetBIOS station
Function: Specifies an IP address to associate with the statically configured name.
Instructions: Enter the valid IP address of a NetBIOS station.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.11.4.1.6
Vista de pagina 187
1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 227 228

Comentarios a estos manuales

Sin comentarios