
Configuring IP Utilities
A-10
308631-14.00 Rev 00
Parameter: TI Lines per Screen
Path: Configuration Manager > Protocols > Global Protocols > Telnet Server >
Global
Default: 24
Options: 1 to 24 lines
Function: Specifies the maximum number of lines displayed on the Telnet Technician
Interface console screen. The screen may override the number of lines you
specify if Telnet can negotiate the window size with the remote client.
Instructions: Set according to your console requirements.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.7.1.3
Parameter: TI More
Path: Configuration Manager > Protocols > Global Protocols > Telnet Server >
Global
Default: Enable
Options: Enable
|
Disable
Function: Specifies whether the Technician Interface pauses after each screen fills with
data.
Instructions: Select Enable to configure the Technician Interface to pause after each screen
fills with data. Select Disable to configure the Technician Interface not to pause
after each screen fills with data.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.7.1.4
Comentarios a estos manuales