Avaya BCM50 Guía de configuración descargar pdf (Pagina 512)

100

101

512 Chapter 70 Dial Up Interfaces panel

NN40020-603NN40020-603

Modem Dial-out IP Address

Figure 141 Modem Dial-out Interface IP Address Specification tab

To configure the Modem IP Address Specification

1 Click Configuration > Resources > Dial Up Interfaces.

2 Click the Modem interface to configure.

3 Click the IP Address Specification tab.

The IP Address Specification panel appears. See Figure 141.

4 Configure the IP Address Parameters. Refer to the information in Table 114.

Global Settings panel

The Global Settings panel contains the specification of the Failover Interface. This is a drop-down

list of the Dial-out interfaces that do not have “Automatic dial-out” selected. Refer to “WAN

failover” on page 513. The Global settings panel is shown in Figure 142.

Table 114 Modem Dial-out Interface IP Address Specification fields

Attribute Value Description

Local IP Address Specification

Remote Assigned <check box> When selected, the BCM obtains it’s IP address from the

remote end.

Default: enabled

IP address <IP Address> When the Remote Assigned parameter is disabled, a

static IP address must be configured in this parameter.

Remote IP Address Specification

Assign IP address to

remote

<check box> When selected, BCM will assign the “IP Address” field of

this section to the remote end of the connection.

IP Address <IP Address> The local IP address used on the BCM for the dial-out

connection.

Default: 10.11.16.16

1 2 ... 507 508 509 510 511 512 513 514 515 516 517 ... 567 568

Comentarios a estos manuales

Sin comentarios

Avaya BCM50 Guía de configuración Pagina 512

Comentarios a estos manuales

Relacionado con productos y manuales para Software Avaya BCM50