Avaya BCM50 Guía de configuración descargar pdf (Pagina 392)

100

101

392 Chapter 46 Setting up VoIP trunks for fallback

NN40020-603NN40020-603

• Ensure the PSTN and VoIP line pools have been configured before you continue with this

section. For information about creating a VoIP line pool, see “Configuring VoIP trunk

gateways” on page 381. To configure PSTN lines, select Configuration > Telephony > Lines

> Active Physical Lines.

Adding routes for fallback

Enter the routes you want to use for normal and fallback traffic.

To add routes, select Configuration > Telephony > Dialing Plan > Routing.

To add the PSTN route to other system

1 Type a number between 001 and 999.

This route defines the PSTN route to the other system. Only numbers not otherwise assigned

will be allowed by the system.

2 Click OK.

To add the PSTN route to the local PSTN lines

1 In the Route field, type a number between 001 and 999.

This route defines the PSTN route to your local PSTN.

2 Click Save.

To add the VoIP route

1 In the Route field, type a number between 001 and 999.

This route defines the VoIP route.

2 Click Save.

Assigning the line pools to routes

Assign the line pools to the routes you created in the previous section.

To assign PSTN line pool (to other system)

1 Click the route you created between the PSTN line and the other system.

2 In the Use Pool box, type the letter of the line pool for the PSTN lines to the other system.

3 In the External Number field:

If this is a public PSTN line, enter the dial numbers that access the other system through the

PSTN. For example: 1<area code><local code>.

Note: If you already have routes for your PSTN or VoIP line pools configured,

you do not need to configure new routes, unless you cannot match the dialed

digits.

1 2 ... 387 388 389 390 391 392 393 394 395 396 397 ... 567 568

Comentarios a estos manuales

Sin comentarios

Avaya BCM50 Guía de configuración Pagina 392

Comentarios a estos manuales

Relacionado con productos y manuales para Software Avaya BCM50