Avaya BCM50 Guía de configuración descargar pdf (Pagina 497)

100

101

497

Networking Configuration Guide

Chapter 69

Dial Up overview

The dial-out interfaces on the BCM offer three key services:

• Remote Access allows users at a client station to connect to the BCM across a phone line

using Point to Point Protocol (PPP). This allows a person working from home or from a

remote location to connect to the BCM LAN through a modem and a phone line.

• Automatic Dial-Out automatically establish a PPP connection to a remote location through a

phone line. Automatic Dial-out can be used for services such as SNMP Trap delivery service,

Log download, Backup download, CDR records push, Software Updates pulls and the Key

Codes file upload.

• WAN Failover is used in conjunction with the Integrated Router. The Integrated Router

monitors the status of the primary WAN link. When the primary WAN link is detected to have

failed, the Integrated Router will route the traffic to the WAN Failover dial-up interface. When

the WAN link recovers the dialled failover WAN connection is terminated and the IP traffic is

then routed over the primary WAN link.

The primary WAN link is located on the integrated router and the dialup links are located on the

CSC card.

Refer to the following information on Remote Access, Automatic Dial-Out, and WAN failover

services:

• “Remote Access Service” on page 498

• “Automatic Data Dial-Out Service” on page 499

• To configure Dial-In:

“Modem Dial-In Parameters panel” on page 514

“ISDN Dial-In Parameters panel” on page 518

• To configure Dial-Out:

“Dial-out Interfaces panel” on page 501

• To configure WAN failover

“WAN failover” on page 513

1 2 ... 492 493 494 495 496 497 498 499 500 501 502 ... 567 568

Comentarios a estos manuales

Sin comentarios

Avaya BCM50 Guía de configuración Pagina 497

Comentarios a estos manuales

Relacionado con productos y manuales para Software Avaya BCM50