
144 Chapter 7 Optional VoIP trunk configurations
P0609327 02
4 Click anywhere off the IP trunking dialog to save the changes.
Remote Capability MWI Y, N The public or private OLI (outgoing line identification) are
separately configurable for each telephone, under Line
Access. Therefore, when the VoIP trunks allow name display
on outgoing calls (Send Name Display), the system will send
the appropriate OLI, based on line type (Public or Private).
Default is Y.
Virtual Private Network ID <digits> Default:0
This is the VPN ID for a remote system, such as Succession
1000/M. In some applications, such as for the Survivable
Remote Gateway (SRG) acting as a Branch Office, this ID is
required to ensure that Bandwidth Management is handled
correctly for calls coming into the Succession 1000/M from
your system.
Zone ID <digits> Default:0
A remote system, such as Succession 1000/M, may
configure your system into a separate zone to accommodate
specific dialing requirements, such as for an SRG system
acting as a Branch Office to a Succession 1000/M system.
The system administrator of the Succession 1000/M system
provides the Zone ID. Enter that number here and include it
in any destination codes directed to or through that system
so that the remote system can correctly direct incoming calls.
Table 38 IP trunking interoperability fields (Continued)
Field Value Description
Comentarios a estos manuales