Avaya IP Telephony Guía de configuración descargar pdf (Pagina 107)

Chapter 6 Setting up VoIP trunks for outgoing calls 107

IP Telephony Configuration Guide

Outgoing call configuration

This section explains how to set up your system to place calls through VoIP trunks. The system at

the other end of the call must be set up to receive VoIP calls.

Outgoing call configuration details are explained under “Managing H.323 and SIP trunks”.

An example of an outgoing call over VoIP trunks is provided under “PSTN call to remote node”

on page 109.

Managing H.323 and SIP trunks

The Business Communications Manager uses the same type of records for IP trunks that it creates

records for physical lines and for target lines. Found under Services, Telephony Services, Lines,

VoIP lines, these records allow you to set some parameters about how the line will work.

When you have determined how you are going to split your trunks between H.323 and SIP trunks

(“Counting IP trunks” on page 87), you can configure the lines and put them into line pools, which

you use to create routing configurations.

Note that the H.323 lines start counting from the lowest position on the 60-line list, and the SIP

lines start from the top.

Once you have created the line pools, you assign them to the telephones, as you would any other

line pool.

QoS Monitor Disabled

Enabled

Choose Enabled, if you intend to use a fallback PSTN line.

Ensure that QoS Monitor is also enabled on the remote

system.

Otherwise, choose Disabled.

For information about QoS, refer to “Quality of Service

Monitor” on page 127

Transmit Threshold read-only

Receive Threshold read-only

Destination Digits <numeric>

(could be the

same as the

destination code

for the route to

this system)

Set the leading digits which callers can dial to route calls

through the SIP trunk. Ensure that there are no other

destination SIP endpoints currently using this combination of

digits.

If multiple leading digits map to the same destination,

separate them with a space. For example, 7 81 9555.

These numbers are passed to the remote system as part of

the dialed number.

Table 26 Adding SIP Address Book records (Continued)

Field Value Description

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 221 222

Comentarios a estos manuales

Sin comentarios

Avaya IP Telephony Guía de configuración Pagina 107

Comentarios a estos manuales

Relacionado con productos y manuales para Manuales de software Avaya IP Telephony