Avaya IP Telephony Guía de configuración Pagina 105
- Pagina / 222
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 6 Setting up VoIP trunks for outgoing calls 105
IP Telephony Configuration Guide
6 Click the Save button.
Receive Threshold 0.0 (bad) to 5.0
(excellent)
Enter the Mean Opinion Score (MOS) that the system uses to
determine when a call needs to fallback to a PSTN line. If the
MOS on the receive channel falls below this value for all of the
available codecs, the BCM will fallback to a PSTN line.
For more information about MOS, refer to Appendix E,
“Quality of Service,” on page 191 and the QoS Monitor
chapter of the Programming Operations Guide.
Gateway Type BCM3.6
BCM3.5
BCM3.0
BCM2.5
BCM2.0
CSE 1000
CS 2000
IPT
NetMeeting
Norstar IP
Gateway
Other
Choose the type of system that is accessed through the
remote gateway:
BCM3.6: Business Communications Managers running 3.6
software.
BCM3.5: Business Communications Managers running 3.5
software.
BCM3.0: Business Communications Managers running 3.0
software.
*BCM2.5: Business Communications Managers running 2.5
or 2.5 FP1 or FP1 Maintenance Release software.
BCM 2.0: Business Communications Managers running 2.0
software, or Enterprise Edge systems running 2.0.x software.
IPT: M1 Internet Telephony Network Gateway
CSE 1000: CSE1000 switch.
CS3000: CS3000 switch.
NetMeeting: Microsoft NetMeeting trunk protocol.
Norstar IP Gateway: Norstar IP trunk protocol.
*If your gateway is set to BCMX.X and the other system is
upgraded to 3.6, your system will automatically update this
listing to BCM3.6 when the other system is contacted after the
upgrade. If this does not occur, your original configuration may
not be correct and you will have to set the change manually.
Gateway Protocol None
SL-1
CSE
Select the gateway protocol that the trunk expects to use.
None: No special features
SL-1: Use for BCM 2.5 systems only that require MCDN over
VoIP trunks
CSE: MCDN protocol for gateways that provide VoIP service
through Meridian 1 IPT (BCM 3.6 and newer software) or CSE
1000 gateways (BCM 3.0 and newer software)
Destination Digits <numeric>
(could be the
same as the
destination code
for the route to
this system)
Set the leading digits which callers can dial to route calls
through the remote gateway. Ensure that there are no other
remote gateways currently using this combination of
destination digits.
If multiple leading digits map to the same remote gateway,
separate them with a space. For example, 7 81 9555.
These numbers are passed to the remote system as part of
the dialed number.
Table 25 Remote gateway record (Continued)
Field Value Description
- Business Communications 1
- Manager 3.6 1
- IP Telephony Configuration 1
- Trademarks 2
- Contents 3
- Chapter 3 4
- Chapter 4 4
- Chapter 5 5
- 10 Contents 10
- P0609327 02 10
- Before you begin 15
- Symbols used in this guide 15
- Text conventions 16
- Acronyms 17
- Related publications 18
- How to get help 19
- 20 Preface 20
- Chapter 1 21
- Introduction 21
- IP telephones and VoIP trunks 22
- Figure 1 Network diagram 24
- Telephones 25
- Gatekeepers on the network 25
- IP network 26
- Key IP telephony concepts 27
- Jitter Buffer 28
- QoS routing 29
- Chapter 2 31
- Prerequisites checklist 31
- Network devices 32
- Network assessment 33
- Resource assessment 33
- Keycodes 34
- Option Description 35
- VoIP trunks 39
- IP telephone records 40
- Installing IP telephones 41
- Choosing a codec 45
- Choosing a Jitter Buffer 46
- Before installing 46
- Using a 3-port switch 46
- Display buttons 48
- Troubleshooting IP telephones 51
- Operation issues 52
- Configuring DHCP 53
- IP telephony DHCP notes 54
- Checking IP server status 56
- Figure 7 IP Terminal status 57
- Notes about Hot Desking 62
- Customizing feature labels 63
- Moving IP telephones 69
- Figure 16 i2050 Switch type 72
- Handset and call functions 74
- Configuring NetVision records 75
- Assigning general settings 76
- Changing a handset Name 82
- Deregistering a telephone 83
- Configuring local VoIP trunks 85
- Published IP address 86
- Counting IP trunks 87
- Configuring media parameters 89
- Setting up the local gateway 91
- How to use target lines 98
- Configuring target lines 99
- Chapter 6 101
- Field Value Description 104
- 6 Click the Save button 105
- Outgoing call configuration 107
- H.323 trunks 108
- SIP trunks 108
- Keycodes: 2 108
- PSTN call to remote node 109
- Call process 110
- Describing a fallback network 113
- Adding routes for fallback 114
- Figure 35 Route XXX screen 115
- Figure 36 VoIP schedule 117
- How fallback routing works 120
- Settings for 124
- Santa Clara 124
- Connecting an i200X telephone 125
- PSTN fallback metrics 126
- Quality of Service Monitor 127
- Updating the QoS monitor data 128
- Chapter 7 129
- 3 Enter the port settings 130
- Modifying PortRanges 131
- Using a gatekeeper 133
- 8 Click Submit 140
- Gatekeeper call scenarios 141
- Faxing over VoIP lines 142
- Chapter 8 147
- WarehouseHead Office 148
- Appendix A 153
- Efficient Networking 153
- Network engineering 154
- LAN engineering examples 157
- WAN engineering 158
- Setting Non-linear processing 159
- Enough link capacity 161
- Further network analysis 162
- Components of delay 163
- Reduce link delay 163
- Reducing hop count 164
- Adjust the jitter buffer size 164
- Reduce packet errors 164
- Routing issues 165
- Appendix B 167
- Silence compression 167
- Time -> 169
- Bandwidth -> 169
- Channel/Link Max 169
- Comfort noise 172
- Appendix C 173
- Network performance utilities 173
- Appendix D 175
- Interoperability 175
- Speech path setup methods 176
- Media path redirection 177
- Gatekeeper 177
- No feedback busy station 178
- Interoperability 179 179
- 180 Interoperability 180
- Using VLAN on the network 181
- 182 Interoperability 182
- Symbol NetVision telephones 183
- 184 Interoperability 184
- Interoperability 185 185
- 186 Interoperability 186
- Interoperability 187 187
- 188 Interoperability 188
- Interoperability 189 189
- 190 Interoperability 190
- Appendix E 191
- Quality of Service 191
- 192 Quality of Service 192
- Measuring Intranet QoS 193
- Recording routes 194
- Adjusting Ping measurements 195
- Measurement procedure 196
- Quality of Service 197 197
- Traffic mix 198
- TCP traffic behavior 199
- Network Quality of Service 200
- Quality of Service parameters 201
- Fallback to PSTN 201
- 202 Quality of Service 202
- Glossary 203
- 204 Glossary 204
- Glossary 205 205
- 206 Glossary 206
- Glossary 207 207
- 208 Glossary 208
- Glossary 209 209
- 210 Glossary 210
- 222 Index 222
Relacionado con productos y manuales para Manuales de software Avaya IP Telephony
Manuales de software Avaya Router Guía de inicio rápido
(132 paginas)
(132 paginas)
Manuales de software Avaya Configuring SNMP, RMON, BOOTP, DHCP, and RARP Services Manual de usuario
(130 paginas)
(130 paginas)
Manuales de software Avaya LT2P Manual de usuario
(76 paginas)
(76 paginas)
Manuales de software Avaya BCM 4.0 Guía de usuario
(42 paginas)
(42 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.038 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales